Sonoff Basic work with Apple Homekit

This firmware makes the Sonoff WIFI Smart Switch compatible with Apple Homekit!

Compatible Devices

This Software is currently tested on: Sonoff Basic, Sonoff Slampher, Sonoff S26

AutoReconnect after power outage

A problem with the old firmware was that after a power outage the Sonoff was immediately searching for the stored WIFI connection, but since the router was still powering on the Sonoff was prompting the configuration procedure. Now this problem is fixed, if the Sonoff does not have a WIFI Connection every 10min the Sonoff will restart.

Installation Instructions

Flash the Sonoff

1. Unplug your Sonoff from the power line
2. Connect your Sonoff to a serial adapter TTL FT232, hold down Setting Switch button and Connect TTL FT232 to USB port on your computer.  Unpress Switch button after 3s.
   
   
3. Download firmware 
4. Run the ESP8266Flasher.exe Config as image below and Click Flash button.
   
   
   
   
   
   
   
   
   
   
5. Flash success. Connect Sonoff to power.

Add Sonoff to Home app

1. Connect your iPhone or iPad to the new wifi network Sonoff-xxxxxx
2. If not found Sonoff-xxxxxx then hold down setting switch 10s to reset and try again.
3. Wait for the Apple Captive Portal and select your WiFi network
4. Choose and insert your WiFi Password and click Join button (Sonoff and Mobile must connect same wifi)
5. Open the Home app
6. Click the + symbol
7. Click I don't have the code...
8. Select the Sonoff-xxxxxxxxxx Switch 
9. If the Sonoff-xxxxxxxxxx does not appear on top of the page try to press the sonoff button a 10s, kill the Home App and try from step 4.
10. Confirm that you want to add the Sonoff
11. Insert the Password that is 88888888 or comment your devices with mac address string, i will reply your comment with correct password.